Macchine Tessili Usate


POLYSPIN BCF 4, POLYPROPYLENE BCF CARPET YARN PRODUCTION MACHINE

GENERAL TECHNICAL DATAS OF POLYSPIN BCF 4

Type of the machine : Modular line which is suitable for the production of monocolor BCF carpet yarn

Machine Configuration :In each module on the platform extrusion , pumping ,spinning,cooling,lubrication , drawing , bulking , intermingling and winding phases are vertical spinning form and melted polypropylene cooled with air and the yarn is spun from 8 spinneret by means of 2 metering pump and total 4 yarns is produced as in couple.Single extruder is used and 4 yarns will be monocolor. Each two yarns is wound in winder which has automatic cone converter and two conescapacity.The machine has modular design therefore it is suitable for making high production capacity system to put as line up.

Output : 1200-3000 dtex Polypropylene BCF yarn

Speed : Winder speed maximum 3500 m/min

Capacity of the machine : Although production capacity of POLYSPIN BCF 4 machine depends on the dtex of yarn and speed of winder , it meets following capacities

One Unit

1600 dtex 2300 kg / day
2000 dtex 2600 kg / day
2500 dtex 2800 kg / day


Raw Material : Polypropylene
Spinfinish oil
Masterbatch



Room Conditions : Temperature 10o C – 30o C
Rate of relative moisture 60% - 80 %
Power supply changing , Frequency ± 1%
Voltage ± 5%


Notes : Production capacity and general performance of the machine can be changed due to the different factors. Some of these factors are quality of raw material, quality of spinfinish oil , quality of masterbatches, type of the yarn to be produced , take care of maintenance and using of the machine and experince of the stuffs . If above given conditions can be obtained in the highest level , one of mentioned capacity can get as a result of any trial.

POLYSPIN BCF4 ( EACH MODUL ) IS INCLUDED OF FOLLOWING UNITS :

2 Feeding and Dosing Units ( Colortronic )
1 Extruder
1 Oil Tank
2 Metering Pump
1 Spin Pack
1 Cooling Cabinet
1 Cooling Station
1 Air Channel
1 Spinfinish application set
2 Pretension Cylinder and Separation Cylinder
4 Heated Godet ( Low godet )
4 Heated Godet ( Speed godet )
2 Double Bulking Jet System
2 Cooling Drum has Double Chanel and Vaccum
2 Radial Fan ( Cooling drım vaccum fan )
4 Intermingled Cylinder and Separation Cylinder
2 Intermingled Unit has Double channel , Sound Isolation Cabinet
Winder with aoutomatic cone converter ( 2x250 )
1 Central PLC Control System, Electric – Electronic supplies , AC Drivers and Display Unit
1 Platform and stairs
1 Air gun , SAS Principal
4 Fiber By-Pass Unit, SAS Principal
2 Pressed Air Heating Unit , SAH Principal
4 CD300 Rieter Winders